Hello, friends, we all know that in the actual use of industrial enamel equipment, such as enamel reactor, due to technological needs or experimental needs, it requires us to monitor the acidity and alkalinity of the materials in the enamel reactor in real time, but the materials in the reactor have certain corrosiveness and the enamel reactor belongs to the pressure vessel, which also has certain pressure, can not and open enamel reactor with the general acidity meter as convenient detection, which to many enamel equipment users friends brought a very big trouble. The following author for the Taiji enamel reactor to the reactor of the material acidity and alkalinity of the determination of the following points, I hope to help you:
1, enamel reactor if the user needs to test the acidity of the material, then, in the selection of enamel reactor should indicate that the configuration of acidity meter, in this way we will be in the reactor kettle cover reserved for the installation of acidity meter interface, the interface is generally made into the connection type of flat welding flange.
2. The acidity meter used in enamel reactor should be made like glass-lined temperature sleeve, which can be directly inserted into the material in the reactor and as deep as possible, with ph probe at the low end.
3. Choice of ph detector for ph meter: material characteristics include: ph, reaction temperature, viscosity, if it is a general material to choose the general line, if it is highly corrosive reaction temperature to choose high-end, and stirring type and speed also have a certain relationship.
4. Vitreous enamel reactor with ph meter ph indicator: installed in the top of the ph meter, sensor and the bottom of the probe connected to the general selection of digital display, you can at a glance, if you need to display on the control computer, to choose can be connected to the external transmission line connection terminal, so that more convenient operation.